Device Configuration

Overview

The web interface shows the current status of the Devio and has a number of tabs that allow different device settings to be reviewed or adjusted. Three tabs are available.

Settings tab
Auto Setup tab
Dashboard

Page Navigation

The right hand side of the web interface allows for toggling between the Settings, Auto Setup and Dashboard tabs. When the web interface is opened the Settings tab will be displayed by default.

Item	Description
	Settings Tab
	Auto Setup Tab
	Dashboard

Device Status

On the left of the web interface there is a device information column that displays current status indicators, IP address, firmware level, device model and access to security settings of the Biamp Devio.

Item	Description
1	Status indicators: Bluetooth: Only shown on Devio models that support Bluetooth. Green when Bluetooth is ready for a connection but is hidden, Green & Blue when the Bluetooth is ready for a connection and discoverable, Blue when Bluetooth is connected USB: Green when a valid USB connection is detected, unlit when USB connection is not detected Microphone: Green when one or two DTM-1 or DCM-1 microphones are connected, or when one TCM-XEX or TTM-XEX microphone is connected, red when no microphones are connected Auto Setup: Green when Auto Setup has been run successfully, amber when Auto Setup is in progress, red if Auto Setup needs to be run or has previously failed
2	Indicates the current IP address the Devio is using
3	Indicates the current device Firmware version
4	Indicates the model of Devio device
5	Security opens a credential dialog and allow users to update the password credentials of the device

Settings

A number of device and network editable fields can be reviewed and adjusted on the Settings tab.

Item	Description
	Enter Editing Mode
	Apply Changes
	Once Edit Mode is enabled, cancel changes

Editable Fields

Name	Description
Device Name	The hostname of the Devio device
Device Location	A user defined location description
Enable DHCP	Allows the IP address to be configured via a DHCP server
System Date and Time	The current system date and time. A customized time can be specified in this field, or the Devio can be requested to synchronize to the clock of the connected computer
Synchronize to PC Clock	Can be used to update the current date and time on the Devio to match the date and time of the connected PC
Enable USB Video	Enables or disables HDMI video from computer over USB connection to Devio utilizing DisplayLink USB graphics technology
Enable Headset Interface	Enables or disables connection to desktop phones via the headset interface port
Headset Interface Pinout	Specifies the headset pinout configuration. Refer to the Headset Interface Pinouts page for more details
Specify Listen Port for SSH	Specifies the port Devio uses to receive requests for new SSH sessions
Enable Plaintext DTP	DTP commands will be sent over plain text when enabled. If disabled, the SSH console will allow for authentication and secure DTP connections
Enable Web Interface	Enable HTTP/HTTPS web browser access to Devio's web server
Enable Secure Web Interface	Enable HTTPS access to provide an encrypted tunnel for any data being sent between a web browser and Devio's web server. By default, unencrypted HTTP is used.
Microphone LED Mode	Allows selection of the LED feedback shown on the microphone when the USB connection from the PC is disconnected
HDMI Output 1 Video Source	Sets the priority for video input source to HDMI output port 1
HDMI Output 1 Max Resolution	Sets the maximum resolution for the HDMI output
Enable HDMI Audio Output	Enable far-end audio to be placed on HDMI output. Only a single HDMI output may have audio routed to it at one time
Enable HDMI Black Video Signal	Enable units to send black video signal when no source is present, keeping display speakers active for audio
Enable SNMP Interface	Enables the SNMP Interface to allow configuration and reporting of Devio specific information to a network management system
SNMP Read-Only Community	The community string used to restrict access to read only SNMP objects
SNMP Read-Write Community	The community string used to restrict access to read write SNMP objects
SNMP Trap Destination	A SNMP trap can be specified as part of enabling SNMP device monitoring. This is the IP address if the notification server
SNMP Trap Port	The port used to connect to the notification receiver
SNMP Trap Community	The community string used for sending SNMP traps to the notification receiver
Enable Bluetooth	Allows Bluetooth wireless connectivity
Bluetooth Name	Sets the Bluetooth discovery name
Bluetooth Connection Timeout	Sets the period of inactivity after which the Devio will drop the active Bluetooth connection. Specified in seconds. A value of '0' is regarded as do not drop.
Enable Bluetooth Connection Tone	Plays a tone upon successful Bluetooth connection
Enable Bluetooth Discoverable	Make Devio discoverable by Bluetooth devices

Auto Setup

In the Auto setup tab page there is a 'Start Auto Setup' option. This will enable the auto room tuning process to calibrate the system audio. The system will prevent the Auto Setup from running if a call is in progress.

Auto Setup will enable the automatic room calibration mode.

Auto Setup Log

The Auto Setup Log displays the most recent events reported by Devio.

Dashboard

Depending on the model of Devio selected, the Dashboard interface will show different properties. Audio meters, Level controls, Active Inputs and Microphone Beam Tracking information are available, if supported by that model.